Samsung TVs are available in a wide range of sizes, image quality, pricing ranges, and technological features, all of which are customizable. Samsung provides you with a remote controller regardless of the model of your Samsung television. This remote control enables you to change channels, adjust the volume, configure the playback controller, and more.
In case, you have lost control of your Samsung TV remote for any reason, you may be searching for alternatives. Learning how to switch on a Samsung TV without a remote control is the most obvious requirement. Televisions from Samsung have the same capabilities as any other television. So, they can be turned on straight from the TV.
That’s why, today I am going to show you how to turn on your Samsung TV without using a remote or the power button.
Does Turning on Samsung TV without Remote Works?
Most smart TVs, including the Samsung TV, can be turned on without a remote control. There are a lot of situations when you might need to use your Samsung TV without a remote. For example, you might have misplaced your remote control or needed to change the batteries. Or just the remote itself is broken.
In such cases, the you eventually have to turn on Samsung TV without the use of the remote control. The procedure of turning on your Samsung smart TV, on the other hand, is highly depending on the model you have. While you surely can turn on your Samsung TV without a remote, the usability is severely limited.
What more you can do Without a Remote Control
Setting up any settings without using a remote control is done in the same way as previously explained. On all televisions, the following main options are accessible to viewers:
Tuning in and looking for channels are two activities. Depending on your preference, you can have it done automatically or manually. After you’ve finished, be sure to confirm and save your changes to your computer.
Make the necessary adjustments to the brightness and contrast. Using the volume keys on your keyboard, you may adjust the position of the slider in this section.
The initial stage is selecting a signal source. The frequency of transmission, as well as other technical factors, are explained further below.
After each adjustment, you must save the changes by pressing the “OK” button on your keyboard. You will lose all of your entered settings if you do not do this before exiting the menu before you exit.
How to turn on Samsung smart tv without remote or power button
Every Samsung TV model has its own set of instructions and basic guidelines for turning on a TV without a remote. Here’s how to go about it.
Take a look at the Samsung TV’s backside
The TV Controller button is usually found on the rear of the Samsung TV’s bottom right corner. It may be used to move up and down as well as left and right.
To switch on the Samsung TV without a remote, press and hold the center button for a long time. You could choose with a single click of the middle button also. Toggling an option will pick it.
Look at the Samsung TV’s Front
The next best place to look for the TV remote on the Samsung smart TV is in the center.
On certain Samsung TVs, the TV Controller is located in the center of the front section. There are about five buttons. The TV will turn on if you hold down the center button for a long time.
A single button controller in the center of the front bezel will be seen on just a few 2018 TV models. To turn on the Samsung TV, hold down the center button for a long time.
Check Samsung TV’s Front Panel on Side
A TV Controller will be found near the bottom of the bezel on just a few Samsung TVs. When you’re facing the device, look for it on the right-hand side of the screen.
To switch on the Samsung TV, you must push the power button.
If you lose your Samsung TV remote, you don’t have to worry about things becoming too complicated. You can turn it on even if you don’t have the controller. To take advantage of turning on the TV, all you have to do is locate the Jog Controller. Also find out How to Turn on Roku TV without Remote.
Turn on Samsung TV with phone
Isn’t it possible that you have a TV remote control with you at all times? You could start the next episode of your favorite show, change the channel, or adjust the volume using SmartThings on your phone.
You’ll need to be logged into your SmartThings account to access the Menu option. Then pick your TV from the list by tapping All devices. The app’s remote will show as an on-screen button. Depending on the TV, the remote’s selections will be different.
If you ever lost the original remote and got another universal remote, learn How to program any remote to a TV.
Using the previous section basic strategy of operation, you can operate your TV without using any remote controllers. Another option is to visit the manufacturer’s official website and look for the instructions for that particular television. It’s extremely simple to locate the panel or sticker on your TV’s hardware. You’ll definitely found it on the back panel.
This FAQ part is all about finding solutions to some of your concerns that may come while searching for How to turn on Samsung tv without remote. Let’s learn more!
Is it true that all televisions have buttons on them?
The power button (joystick) on most televisions is placed immediately under the screen, in the center, on the right or on the left side. Push and hold the button for one second to turn on your television after you’ve located the button. Use the same button to turn off your television if you want to save energy.
What if your Samsung TV refuses to power on?
Unplug your Samsung TV and push the power button on the TV for 10 seconds or longer if it is not turning on after a power loss. Wait three minutes before plugging the TV back in and turning it on. If the light is blinking, it means the power supply is broken.
Is there a reset button on a Samsung TV?
If you wish to direct the remote control at the TV, hold down the “Exit” button for 12 seconds. The “enter” button on the remote control is actually for resetting the television. The device will shut down.