Edifier R1850DB vs R2000DB Best Speaker Comparison

When it comes to bookshelf speakers, Edifier is among the top brands. These speakers look immensely appealing but it’s not just about the looks. These speakers produce high-quality sound and if you’re looking for a budget-friendly proposition, these are both fantastic options. In this detailed comparison, I’ll go over the key differences between the Edifier R1850DB vs R2000DB.

Between Edifier R1850DB vs R2000DB, the R2000DB is larger in size and also produces powerful sound. The cost of R2000DB is also slightly higher than R1850DB.

Edifier R1850DB vs R2000DB: Product comparison

In this section, we will scrutinize each and every feature of these Edifier models and compare them. Here we will provide the R1850DB review and R2000DB review in detail, and compare them with each other to find out the best. Find about Powered Speakers that comes Under $100.

Comparison table:

Feature
Edifier R1850DB
Edifier R2000DB
Color 
Black 
Black, wood
Frequency response
60Hz-20KHz
55Hz-20KHz(±3db)
Power output
RMS 16Wx2 + 19Wx2
RMS 24W × 2 + 36 W × 2
Tweeter 
19mm silk dome
25mm Ru-Fe-B silk dome
Bass driver
4”
5”
SNR
⩾85dBA
≥85dBA
Port 
Front-ported
Rear-ported
Dimension 
154x254x224mm(w x h x d)
9.5in x 11.25in x 7.5in (WxHxD)
Feature
Edifier R1850DB
Color 
Black 
Frequency response
60Hz-20KHz
Power output
RMS 16Wx2 + 19Wx2
Tweeter 
19mm silk dome
Bass driver
4”
SNR
⩾85dBA
Port 
Front-ported
Dimension 
154x254x224mm(w x h x d)
Feature
Edifier R2000DB
Color 
Black, wood
Frequency response
55Hz-20KHz(±3db)
Power output
RMS 24W × 2 + 36 W × 2
Tweeter 
25mm Ru-Fe-B silk dome
Bass driver
5”
SNR
≥85dBA
Port 
Rear-ported
Dimension 
9.5in x 11.25in x 7.5in (WxHxD)

What are the similarities?

  • They both have a signal to noise ratio of 85 dB
  • 10-degree elevation
  • Similar MDF construction
  • Has bass and treble dials
  • All controls and connections are on the backside of the speaker
  • Comes with remote control

How to set up Edifier speakers?

Follow these steps to connect the Edifier Speakers. These models have similar setup procedures.

  • Connect the active speaker to the passive speaker with a speaker cable.
  • Use the audio cable to connect to your desired audio source.
  • Connect a subwoofer (additional) to the sub out of the Edifier R1850DB.
  • If you wish to connect a subwoofer with R2000DB
  • Make sure the subwoofer is self-powered.
  • Take an RCA-Y splitter
  • Connect the audio source and the speaker with one package.
  • To connect the speaker with the subwoofer, use another.
  • Use the power adapter to connect the speakers to the power supply
  • The LED light on the speaker indicates it is turned on.

How different they are from each other?

Design and fit

The difference between Edifier R1280DB vs R2000DB is the size and port although R2000DB looks better and has a better fit. 

The R2000DB is slightly larger and comes with a rear bass port whereas the R1850 has a front port. These speakers are made of MDF material which minimizes acoustic resonance and ensures accurate sound.

They both have a fabric cover that attaches to the speaker easily and protects the drivers from dust. So, you have the option to cover up the speakers or uncover them as per your wish. Music enthusiasts often like to view drivers as they listen to sound unless they have kids in the house.

Both Edifier R1280DB and R2000DB have a 10-degree elevation which ensures the drivers and sound will be directed towards the listener’s ears.This is quite an advantage because in other speakers you need to buy desktop speaker stand separately to make an angle of elevation. So the Edifier saves you this cost.

The speakers come with a LED on the front side that blinks different colors. It glows red for optical, blue for Bluetooth, and green for line-in.

The R2000DB comes in gloss piano black finish and wood color. This gloss black is less prone to catch fingertips. Actually, the R2000DB has a similar design to R1700BT. The rubber feet on the bottom eliminates vibration and scratching the desk. These active speakers are designed to sit on tables and are best if you use them for desktop speakers. You can also find out these beautifully designed Satellite Speakers.

The following cables come with the R2000DB: dual RCA to dual RCA, RCA to 3.5mm, optical cable, 3mm DIN cable of 10ft. R1850DB has 5.5ft 3.5mm to RCA, 5.5ft RCA to RCA, 15ft speaker cable, 5 ft. fiber optic.

So, between the R1850DB vs R2000DB, the R2000DB comes with a shorter speaker cable. While this isn’t a major issue, it still might be a problem if the speakers are seated far away in your setup.

Winner: Edifier R2000DB

Performance

The performance of a speaker depends on some major factors and most of these factors suggest that R2000DB performs more effectively than Edifier R1850DB

Transducers

Speaker drivers are the heart of a speaker. larger the drivers, more powerful the sound. Between Edifier R1850DB vs R2000DB, the R1850DB comes with smaller drivers. It has 0.75-inch silk dome tweeters and a 4” woofer. The R2000DB has a 1-inch Ru-Fe-B silk dome tweeter and a 5.25” woofer.

Between R1850DB vs R2000DB Edifier speakers, the R2000DB has ‘Eagle Eye’ tweeters. The purpose of this kind of tweeter is to scrutinize the ‘tiniest or slightest sound’ and work with them to ensure the output is clear.
Overall, larger drivers, especially larger woofers indicate punchier bass and this might be a reason why Edifier R2000DB active bookshelf speakers didn’t include a sub out.

Winner: Edifier R2000DB

Power

Comparing Edifier R1850DB vs R2000DB, the R1850 dB has a total output power of 35W RMS per speaker that gives a total of 70W RMS. Whereas, the R2000DB can deliver a total of 120W RMS power. The Edifier R1850DB is ideal for near-field listening.
The R2000DB will be slightly more powerful than that, but none can be used to fill large rooms or in-house parties.

Winner: Edifier R2000DB

Port

As mentioned above, between Edifier R1850DB vs R2000DB, the R1850DB has a front port. Whereas, the R2000DB has a rear port. The front ports are chosen by many who have compact spaces. Rear ports are known to produce less chuffing noise or resonance.

However, if you put them against walls, it will restrict bass response or there will be ‘muddling of the bass’.

WInner: Tie

Sound

Beween Edifier R1850DB vs R2000DB, R2000DB obviously sounds better with better frequency range and enhanced bass.

Edifier R2000DB has built-in DSP (digital signal processing) and DRC (dynamic range control) technologies. These are uses to minimize distortion and produce more accurate sound.


The amplifiers of both speakers have an SNR of 85dB and some slight hiss are produced from the tweeters. The high and low frequencies are handled well. The soundstage is wide and the imaging is accurate.
Comparing Edifier R2000DB vs R1700BT, they have almost similar tonality but the R2000DB has deeper bass. You can also increase or decrease the bass and treble as per your wish. Between R1850DB vs R2000DB, the R2000DB has a much lower frequency response. 

With a larger woofer driver and rear bass port, this speaker is expected to produce punchier bass. The audio is not negligent in R1850DB due to slightly smaller drivers. The 60Hz to 20kHz frequency response is enough to focus on bass frequency and produce a decent shake in near-field listening. 

With a sub out, the speaker is designed to add a subwoofer to enhance the bass. You can use the Edifier T5 Subwoofer that has an 8-inch driver. The R1850DB has pronounced midbass and highs.

If you consider them as entry-level desktop speakers and not high-end ones, you should be quite impressed with the sound quality. these speakers are much better than traditional PC speakers and have a reasonable price tag. 
Turning up the volume in R1850DB doesn’t produce any noticeable distortion or crackling. Whether you listen to music or movies, the speakers sound fantastic. The dialogues in movies are crystal clear and loud enough to comprehend. If you are have a knack for sound of the speaker, taka a peek at the Best Audiophile Speakers here. 

Winner: Edifier R2000DB

Speaker position

Another major difference between Edifier R1850DB vs R2000DB is the speaker placement. With R2000DB you need to be careful about placing the speaker keeping a safe distance, which is 2x the port diameter, between the speaker and wall.

This is because the speakers come with the bass port at the back. The R1850DB is less placement sensitive and you can place them near walls without any problems. The 10-degree elevation of the speakers encourages users to place them on tables rather than high on bookshelves.
You should always slightly toe in the speakers for better soundstage. As long as you are not using them in large rooms, the speakers will work well.

Connections

One of the most significant disparities between the Edifier R2000DB and the R1850DB is that the R1850DB has a sub out port for connecting a subwoofer directly, while the R2000DB does not, though there are ways to link a sub indirectly.


R1850DB has the following connections: Line-in input, Optical input port, coaxial input port, speaker port, and bass output. It also has Bluetooth 4.0 version for wireless connectivity. In Edifier R2000DB, you can use the optical or RCA input for different devices.

This speaker also allows you to connect more than one device to it. It has RCA connectors for AUX input. Optical input port, and a speaker port.  You can use the master volume dial to switch between inputs: Line-in1, Line-in 2, Optical, Bluetooth. 

Winner: Edifier R2000DB

Controls

In terms of controls, the rear side of the speaker has a Treble dial, Bass dial, Master volume dial, and power switch. We don’t find this convenient because it isn’t easy to adjust the dials by looking at the backside of the speaker.
Both these speakers come with a remote control which is shorter in length compared to TV remotes.

Comparing Edifier R1850DB vs R2000DB remote control, there are differences in size and shape, and buttons. For Edifier R2000DB remote, it is easy to hold in hands and has a simplistic design. You can use it to power on/off, switch inputs, mute audio, connect Bluetooth, etc.  While using the remote you need to directly point it to the speaker otherwise it will not work.

Edifier R1850DB remote control looks different from the R2000DB remote. The buttons are arranged in a different manner. There is some difference in the controls, the R2000DB remote has buttons for Classic and Dynamic mode. The R1850DB remote doesn’t have these but has buttons for play/pause, next track, previous track. Due to rear controls of the speaker, the remote control is very handy

Winner: Tie

Which one is best for whom?

The Edifier R1850DB is ideal for you if you have a very tight space. This will work as PC speakers on a desktop table. Even if you don’t place them on the desktop table, make sure you place them on tables and listen to them in a sitting position. This is because they are angled and designed to be placed in such away.

While the R2000DB is also ideal for desktop tables as PC speakers, you can also use them with game consoles or create a mini-home theater. If you really wish to create a home theater, a subwoofer is mandatory. Although it is not as powerful to be in a home theater, you can try it out.

And if you are stil confused, checkout these 2 Amazing Speaker from Polk.

Comparing with Other alternatives:

Fluance Ai60:

The Fluance Ai60 speakers combine Bluetooth technology with a conventional bookshelf configuration to provide a deep, vibrant sound. With larger speakers, the Fluance Ai60 has a greater frequency range and volume. However, R2000DB and 1850DB are both more affordable and much more effective.

Audioengine A5+:

The Audioengine A5+ is well-known for its sleek style and excellent sound quality. The Edifier R2000DB is a close second to the Audioengine A5+, just marginally inferior in most areas but significantly less expensive. In reality, unless you’re a die-hard audiophile, you might not even note the distinctions.

Edifier S1000DB:

The edifier S1000db driven speakers are a classic series of speakers that offer the best. The S1000DB gains significantly more sub-bass extension by using wider and higher-quality drivers and bigger cabinets. Nonetheless, the R2000DB is the most affordable and best speaker for the money.

Parting words

Edifier R1850DB vs R2000DB are PC speakers but you can use the larger one with a TV as well. They are best if you sit close to it and place them on a table so that the drivers and the sound will be forwarded to your ear position. The reasonable cost of the speakers makes them ideal for newbies who don’t want to spend more without knowing which is better.

These are also best for tight spaces, so college students can easily use them in dorm rooms or small apartments.  And with an additional subwoofer, you can get the extra punch from the speakers. One notable difference between Edifier R1850DB vs R2000DB is the RMS power output. The R1850DB has 70W RMS and R2000DB has 120W RMS. 

With almost double the power, the R2000DB will deliver cleaner, powerful, and accurate audio representation. Overall, these speakers have a very easy setup and come with wired connections to different sources or wireless connections with Bluetooth. They also come with a remote control so controlling these speakers, switching inputs or adjusting bass and treble is easy as a breeze. 

Our pick: Edifier R2000DB.

The reason to choose this speaker is the bigger transducers, lower frequency response and larger cabinet size. Although you can’t connect a subwoofer directly, you can easily connect it with additional wires. Also, for near-field listening, you might not want a subwoofer which will reduce the overall cost.

Although you can’t connect a subwoofer directly, you can easily connect it with additional wires. Also, for near-field listening, you might not want a subwoofer which will reduce the overall cost.

For R1850DB, these are compact speakers and with a sub out, it is designed to connect with a sub so the overall cost might increase. It is also very affordable but lacks in some basic sectors. Now the choice is yours. You can also check out about Edifier R980T and Edifier R1280T which are great speakers.

FAQ

How to connect an Edifier speaker to Bluetooth?

Answer: Follow these steps to connect Edifier speakers to Bluetooth:

  • Use the master volume dial or press the Bluetooth icon on the remote to select Bluetooth mode.
  • Take your smart device and turn on the Bluetooth.
  • Select Edifier R1850DB from the list
  • Press on the master volume dial or Bluetooth icon and wait for 2s 
  • This will disconnect Bluetooth
  • If you switch to another audio source, then the Bluetooth connection will disconnect automatically

What can I do if the speakers don’t have any sound.?

Answer: follow these basic steps:

  • Turn off the speakers and turn then on again
  • Disconnect and reconnect to the audio source again
  • Check the master volume dial to ensure it is on high volume
  • Recheck the audio input and the connection
  • Make sure the speakers are receiving signal from the audio source
  • For further assistance, you can communicate with their customer service

What should I do if the volume doesn’t work when wirelessly connected?

Answer: Follow these process to check:

  • On your phone, go to Device settings, then scroll and click on ‘About Phone.
  • Select Software Information and look for Build number
  • Press on the Build number seven times quickly
  • Look for developer settings on the menu
  • Go to developer settings/options and select the ‘disable absolute volume’ to turn it off
  • Turn off the phone and turn it on again
  • The problem should be solved by now.