How to Mount a TV on the Wall without Studs

Few things in life are more enjoyable than removing your TV from its shoddy stand and mounting it on the wall. If you don’t have any studs on your wall or don’t want to use them, but want to save space by mounting your TV on it, you might be wondering if it’s feasible.

What if your obnoxious landlord insists on no drilling on the walls? How to Mount a TV on the Wall Without Studs, or How to Mount a TV on the Wall Without Studs? Don’t worry; in this post, we’ll show you How to Mount a TV on the Wall without Studs.

What you will Need before Mounting a TV without Studs

It is quite difficult to mount a TV without studs. Despite the fact that drywall can hold a TV weighing up to 100 pounds, the device is still fragile, and the mount may require extra support, or the TV may fall to the floor. The TV is supported by wall studs, which provide the frame for the TV. They serve as a solid anchor point for the mount and the television, ensuring that both remain in position.

Another difficulty might be the lack of studs on the wall where you wish to mount the television. Despite the empty walls, a no-stud TV mount will still function. Also check out How To Connect Speaker To TV Without Receiver.

TV Wall Mount Anchors

Previously, drywall anchors were primarily used to hang lightweight things such as tiny photo frames and mirrors.

However, as technology has progressed, these things have become stronger and more dependable. Heavier goods, such as TVs weighing more than 80 pounds, may now be hung on drywall thanks to today’s heavy-duty drywall anchors.

They generally come in a variety of forms and sizes, with the assurance that they will be able to support the TV without damaging your wall. These keep the screws from falling out of their holes and potentially damaging your walls.

Toggle Anchors/ Toggle Bolts

To mount a TV without studs, use a toggle anchor or a toggle bolt. You’ll need a hollow wall anchor with a butterfly toggle at the end that looks like a standard screw. They’ll attach to the back of the wall once you’ve hung them.

They are a strong alternative for mounting a TV on the wall since the toggle portion at the end keeps them from loosening up no matter how much power is used. Because it is incredibly sturdy on its own and easy to install if placed correctly, this solution has successfully enabled many people mount their TVs on the wall without studs in a short period of time.

Molly Bolts

When it comes to installing a TV without studs, a molly bolt is an excellent option. People use it to hang their TVs because of its capacity to hold up to 50 pounds and ease of installation. Another disadvantage of utilizing molly bolts is that they are more difficult to install than other drywall anchors, despite the fact that they are quite robust and well suited for medium to heavy weights.

An intriguing feature is that it is quite thin when left untightened, but once tightened in your wall, the expansion of the sleeves transforms it entirely. The molly bolt will establish an anchor to the back of your wall since it has the same action as a toggle anchor when dragged into your wall, and then you may replace its screws with the screws for your TV wall mount.

Mounting Plate

Consider using a metal or plywood mounting plate or brace in conjunction with these drywall anchors. Mounting plates can be placed behind the TV and secured to the wall with the anchor screws discussed before. After that, you may install the base of your TV wall mount onto the mounting board.

The mounting plate’s notion is that it adds a few more focus points while also providing a larger surface area to sustain the weight of the brace and your TV.

When it comes to aesthetics, make the mounting plate smaller than the TV’s size so that the monitor covers the metal or plywood. If this isn’t possible, the mounting plate can be painted or stained to hide it, or a higher degree of detail can be added for tv wall mount drywall without studs.

What to Keep in Mind

When there are no studs in the walls, anchors and mounting plates are a sturdy and reasonably safe way to keep TV wall mounts in place. Although the technique is straightforward, there are a few points to keep in mind.

Keep in mind the weight of your TV

Please make sure the anchor screws you use are rated to support the weight of your television. Weights vary depending on the type of your television, but a typical 32-inch television weighs between 25 and 30 pounds. As a result, there will be greater weight on a larger screen, necessitating a verification of the maximum load for the anchors you select.

Pay attention to the quality of your wall

The finest wall anchors won’t let you hang a television on ancient drywall. Walls that appear to be frail might really collapse and bow beneath the weight of your television, causing it to break.

Select the most appropriate mount type

Anchor installation is compatible with both fixed and movable TV mounts. It’s entirely up to you to decide which option is best for you. Because movement adds additional weight, anchors may not be the greatest option, but they could work if you add the mounting plate.

If any of these solutions are to work, your wall must be in decent condition. It would be risky to mount if your wall is on the verge of collapsing. Make the required adjustments before mounting the TV.

Use the Right Type of Mount for Your TV

All of the above methods for hanging your TV without studs have their own set of advantages and disadvantages. You may select which technique is ideal for you based on the style of your home and the size and weight of your television. Taking into account all of the advantages and disadvantages of each approach,

I personally advocate using an anchor to secure your television to the wall because they are quite cheap. They are very simple to set up. It comes in a variety of forms and sizes, making it simple to find the right one for your home.

How to Mount a TV on the Wall Using Anchors

Choose the correct anchors

Choose the correct anchors  Looking up your TV’s weight and size online, looking at its box, manual, and so on are all simple ways to find out. After determining the size and weight of your television, you should begin looking for the appropriate anchors to support it.

Choose a location for your TV to be mounted

Once you’ve chosen the proper anchors for your TV, you’ll want to select a location that you like and is hollow – without studs. Make a mark where you want your TV to go and make sure it’s at eye level.

Attach the brackets to your television.

On the back of your TV, you’ll notice four screw holes where you’ll construct and connect the bracket. Your mount may come with a variety of designs, but most TVs will have a little sticker on the back indicating the pattern you should use. After you’ve assembled the components of your bracket, you may attach it to the TV with the screws and washers that came with it when you bought it.

Keep in mind that the screws are easily stripped, so use a drill with a restriction to secure them in place. Alternatively, you may need to drill these screws with extreme caution. If the bracket is securely fastened when you finish firing the screws, you may continue on to the next step.

Drill A Hole In The Wall

Try to measure the area and draw a line through the holes where the anchors will go. The plywood or mounting plate can then be attached to the wall with toggle anchors or molly bolts. In this situation, toggle anchors are a suitable choice, although molly bolts can also be used.

Tighten The Screws

Replace the toggles with screws, attach the plywood or mounting plate, carefully tighten the screws to the wall and the plywood, and make sure it’s secure after you’re done.

Screw The TV Bracket

To secure the TV mount to the plywood, select the appropriate screws. If the TV is too heavy to lift, enlist someone’s assistance.

Hook Everything Up

Hook everything carefully, tighten everything that has to be tightened, and double-check that everything is working well.

Then you can see if the angle is suitable for you. If you bought a tilting mount, you may carefully place it at the angle you choose. To keep the space surrounding the mounted TV neat and your watching experience enjoyable, it’s a good idea to hide all the wires behind it.

Add a Mounting Plate

A mounting plate, which may be used in conjunction with the anchors, is another option. Mounting plates are often constructed of metal, however plywood can also be used. This will make it easier for your anchors to carry the TV, and it will also allow you to add more anchors, making the mount more secure.

The mounting plate, on the other hand, isn’t really attractive, especially if it’s larger than your TV. If you want to achieve the best possible aesthetic impact, pick a mounting plate that is smaller than your TV and in a color and design that complements the rest of your decor.

Mounting TV From the Ceiling

This isn’t the most popular choice, but it may offer your space a classy look without requiring the use of studs. It’s possible that the installation may be more time-consuming and complex than you anticipated.

If your ceiling has beams, you may install your TV on them. The same may be said for joists. In reality, both of these do the same purpose as studs in the mounting procedure; the only difference is that you won’t be using studs. In this situation, take into account the height of your ceiling and the weight of the television. It might not be worth it to install a TV this way if your ceiling is really high.

Mounting TV above fireplace without studs

In this scenario, you must guarantee that you have a permanent backup beneath the walls. Apart from that, make sure your fireplace is adequately ventilated. If a lot of heat escapes through the mantle, the TV’s lifespan will be drastically reduced.

Toggle bolts with a snaptoggle function frequently perform well. There are several sizes available; simply choose the ones that are appropriate for the weight of what you’re installing. If you wish to follow other people’s advice and install plywood first, make sure to account for the weight of the plywood as well as the weight of the television.

You may also use toggle bolts to attach a piece of plywood to the drywall and lag your mount there. Simply paint the plywood to keep this from becoming a nuisance. This would save you the trouble of drilling drywall holes.


It is really easy to mount a television without using studs. You may save space by hanging your TV and save your wall at the same time by using some of these simple ways. Obviously, consider the aforementioned factors, particularly the weight of your television and the sort of mount you will choose.

Hopefully, this article will help you to Mount a TV on the Wall without Studs. And  if you’re into music, also checkout Best Wall Mount Speakers.


Now, check out this section to if you still have some questions about How to Mount a TV on the Wall without Studs.

Without studs, how much weight can drywall support?

Because the answer may vary depending on a variety of circumstances, it’s difficult to offer you a precise figure that will work in every circumstance. Each anchor can support around 50 pounds if you use them to hang your stuff. Instead, use expanding plastic sleeves, which can support between 10 and 25 pounds and are an excellent alternative for hanging picture frames. Hangers and nails are other viable options. They can handle up to 15 pounds and are ideal for displaying small things on the wall.

Why am I unable to locate studs in my wall?

There are a few clever techniques to find studs without using a tool. Take a look at the crown molding or baseboard trim. Baseboards should be nailed to studs, which may be the case if the nail spacing is around 16 inches. With your eye, locate the nails, then bang on the wall precisely above the nail location.

Is it possible to attach a television with only two screws?

If the maximum weight rating of the mount is still greater than the weight of your TV, you’re good to go. If it isn’t, you risk cracking the back of the TV if you tilt or move it frequently (swivel mount). Then again, if it’s a flush mount, though, you’ll be good with just two screws.