There is no denying that Klipsch speakers have been ruling over people’s hearts for years. This is one of the most famous brands for its extraordinary audio equipment.
Today we are going to review two most hyped Klipsch speaker Klipsch RF-7 III VS RP-8000F. These two speakers are incredible and contain quite a similar feature. That’s why the debate between them about which is better is rising a storm.
Klipsch RF-7 III is the updated version of RF-7 and RF-7II and comes with several new mechanisms for remarkable audio quality. The traditional tweeter, big woofer, excellent sensitivity, and decent impedance rate make this speaker worth considering every time.
Other hand, though Klipsch RP-8000F is a low price compared to RF-7 III, it still manages to give tough competition. Every single feature it contains at this small price is praise-worthy. From the cabinet design to drivers or woofers, everything is fantastic.
So, here you will get everything single difference between Klipsch RF-7 III VS RP-8000F to select the suitable one for you. You will also get alternative best speakers as a tip in case you want something different.
Klipsch RF-7 III VS RP-8000F: Differences At A Glance
Some related articles:
Audioengine vs Klipsch Speakers
Klipsch RF-7 III VS RP-8000F
Now it’s time to go a bit deep to see the real difference between Klipsch RF-7 III and RP-8000F. Here you will be able to compare these two floor-standing speakers and can choose one ultimately.
One thing to be noted is that our goal is not to find out the best speaker for you. These two Klipsch speakers are best in their unique way. We instead can find the differences and measure the performance so you can decide which one suits your need.
So, without further delay, let’s dig deeper into the comparison between Klipsch RF-7 III VS RP-8000F.
Klipsch RF-7 III VS RP-8000F: Elegant Design
While buying any kind of speaker, the build quality and design are as important as other criteria. You are going to place it in your living room or your bedroom. And a good-looking speaker can enhance the room decor with an elegant design.
Klipsch RF-7 III
Klipsch RF-7 III is a beautiful tower speaker that comes with a height of 4 feet. This prominent speaker can be your buddy in your home theater setup, increasing the beauty of your room.
Klipsch speakers do not only look premium the build quality is also excellent.
This speaker has an enclosure made with furniture-grade wood veneers, which makes sure a durable structure. The surface feels smooth and sturdy and gives a matte finish.
There are three colors available Black Ash, Walnut, and Cherry. Among them personally, I like the Black Ash finish. This looks premium quality and can snatch away anyone’s attention with the first look.
This veneer finish is also swatch or fingerprint-proof, which means you don’t need to worry about the fingerprint of your children or others.
That dual-chamber enclosure design lets these speaker drivers perform independently. As there are two 10″ woofers, mixing the frequencies and creating distortion is a change. To solve this problem, Klipsch designs the enclosure in such a way that every part inside it can work independently.
On the front side, those grills are detachable. You can remove it if you want or use it with the grills to save the internal parts from pets or kids.
But those copper color woofer is one of the most beautiful parts of Klipsch speakers. If you a good impression in front of your guest, then I would suggest leaving the grills and letting them see the beautiful woofers.
Klipsch RP-8000F
We have another gorgeous speaker with a simple design but capable of attracting people. This speaker has two finishes ebony and walnut. Both of these colors look amazing and can go with any kind of room décor. So, it will depend on you what taste you have.
Next, to give it a durable structure and more convenient, satin painted baffles material is used in the body. This is scratch-proof, reducing your tension a lot if you have pets or kids. Your speaker is not going to lose its beauty after years.
Klipsch took a clever step while designing this speaker: the aluminum feet. This prevents the vibrations from going into the ground directly and reduces unwanted vibration or noise.
You don’t need to buy extra pairs for your speaker. Enjoy distortion-free audio every time.
Now comes the exciting part, which is the detachable grills. Like RF-7 III, this RF-8000F contains these grills and the traditional copper color woofers.
If you are going to choose this speaker, you have the chance to impress your guest with the copper woofer as you had with the RF-7 III speaker.
Klipsch RF-7 III VS RP-8000F: Stuffed With Impressive Features
When it comes to the specifications of Klipsch RF-7 III and RP-8000F, we really didn’t see much difference between them. There is a very slight difference, and most of the features are the same.
Klipsch RF-7 III
High-frequency drivers
It features one 1.75″ titanium diaphragm compression driver for an improved high frequency. That’s why the audio quality is dedicated and different from other speakers.
This is also Klipsch’s traditional driver that this brand use in almost every speaker. The result is never disappointing and really satisfies the ears. With the dedicated woofer, this speaker produces high and low frequency precisely.
90° X 90° TRACTRIX® HORN
To enhance the high frequency and produce the most transparent and dynamic audio quality, Klipsch used the 90° X 90° TRACTRIX® HORN structure. The circular horn throat has been attached with a square horn mouth for a better high frequency.
A compression-molded rubber horn minimizes the distortion and harshness in the audio and ensures a crisp, clear sound.
Cerametallic woofer
Klipsch RF-7 III features two 10″ big spun copper cerametallic woofers for an amazing low-frequency. The bass freak loves this kind of woofer as they can their punchy bass.
These woofers are rigid and lightweight, have a heavy-duty cast aluminum frame, and minimize the distortion as much as possible. And can handle the low frequencies precisely, perfect for any kind of audio content.
As we previously mentioned about the fantastic high-frequency drivers, and now these two excellent woofers. When these drivers start working together, you can expect incredible sound from them.
Power handling capacity
This speaker features 250-watt RMS power and 1000-watt peak power. For any kind of tower speaker to provide a robust audio quality, it should have enough capacity so it can handle the whole system efficiently.
In this case, this tower speaker has a good RMS and peak power. You will have a blast of powerful sound to disturb your neighbors every day.
This kind of feature makes this speaker perfect for home theater, or you can have parties at total volume for the loudest sound.
Impedance and sensitivity rate
Both of these features are balanced in this loudspeaker. With an impedance of 8-ohm, it can produce sound precisely.
I have mentioned this speaker as a loudspeaker for the 100 dB sensitivity rate. Generally, for any speaker to get into the loudest form, 90 dB is more than enough. RF-7 III gives you 100 dB, so you can have the wall-shaking performance with every song you play.
Or if you want to watch some dramatic movie, then primarily because of the louder sound, you will get into the film. It will give you a cinematic experience in your home ever.
Klipsch RP-8000F
TRACTRIX® HORN
Klipsch Tractrix Horn has always praised everyone as these drivers work so efficiently. RP-8000F horn technology is as same as RF-7 III. These horns are superb, reduce unwanted noise, produce the most explicit form of sound, and are primarily responsible for the beautiful sound that RP-8000F is making.
Here the key factor is the 90×90 tractrix horn anatomy made with a compressed molded silicon face. This tractrix horn shape face makes the high frequencies smoother and more admirable by ensuring more airflow inside and outside the cabinet.
By reducing the distortion, this horn, at the same time, decreases the port noise for a clean bass and sound. If you want the clearest form of sound, nothing can beat a Klipsch speaker for sure.
Tractrix port
The rear-mounted tractrix port puts a good amount of effort into a smoother high-frequency. It smooths the airflow minimizing the distortion or turbulence becomes a perfect match for the woofer and cabinet.
LTS vented tweeter
Klipsch RP-8000F floor standing speaker is equipped with a 1″ titanium vented tweeter which is much more advantageous than any aluminum silk tweeter. Great high-frequency response and the most detailed you can get from this vented tweeter.
Moreover, the Klipsch award-winning LTS formula has been used in this tweeter for better performance. Linear Travel Suspension tech gives a life-like sound by lowering the distortion as much as possible.
This vented dome tweeter reduces standing waves so it can prevent any unwanted noise produced by the dome or other pressure.
Cerametallic woofer for a ground-shaking bass performance
Klipsch copper spun cerametalic woofer just compliment the low-frequency dedicatedly and efficiently. This woofer structure and material are perfect for giving the hard punch bass to the listener’s ears.
Extremely rigid, lightweight, dual-layer matted cones hit the low-frequency response, thus producing your favorite bass you ever wished for. This speaker is capable of giving tough competition to any subwoofers.
For any speaker to give fine sound quality, both low and high frequencies need to be precise enough.
Bi-Wiring & Bi-Amping Capability
This speaker has this exceptional capability of bi-wiring and bi-amping.
Bi-wiring facilitates the separation of high and low-frequency flow into different cables. This reduces intermodulation distortion for a balanced midrange performance.
Another hand, when you are about to use separate amplifiers, you can customize by using the outboard crossover, which bi-amping tech allows you to.
Sensitivity rate and impedance
With 8-ohm impedance, this speaker features a 98 dB sensitivity rate too. The impedance rate is perfect for an excellent sounding system.
Also, the sensitivity rate is suitable for making this speaker louder at total volume. A ground-shaking performance for your parties or a dramatic atmosphere while watching movies.
Klipsch RF-7 III VS RP-8000F: Sound quality
Klipsch RF-7 III
Apart from all other features, if your speaker sounds good, then nothing really matters. And a good sound system is actually what Klipsch RF-7 III is aimed at.
This speaker comes in a reasonable price range but is able to prove its worth in every aspect. Before this, RF-7 II was in great demand, and now RF-7 III, the updated version, is ruling over people’s hearts.
Though this is a tower speaker and has a great height, it didn’t compromise the sound quality. It effortlessly creates an illusion of great sound that can fill your entire room.
Big sound to fill both your heart and house. Everything works efficiently, from the body structure to audio features, to satisfy its listener totally.
Most of the tower speakers cannot produce a clear sound primarily because of their size. The sound hears bloomy or gloomy. But Klipsch did outstanding work regarding this.
Like any other bookshelf speaker, soundbar, or others, this Klipsch speaker produces the most precise sound form.
This is what makes it suitable for any kind of music genre. From jazz and classical to rock music, any type of music you can hear like the original content. Even without an extra subwoofer, the bass is rich and powerful to cope with any kind of audio content.
Now the question goes for movies or TV shows. To be very honest, if you are a movie freak and want the movie theater experience in your home, then you must consider this speaker.
In movies theaters, because of the big blast of sound, our heart just starts pumping really fast, and thus, we get the thrill throughout our whole body. And Klipsch RF-7 III tower speaker in its loudest form does the same thing. You can feel the walls are also shaking your heart.
So, what actually makes this speaker be praised this much? If you have been through the whole article, you already know the answer. But let me summarize the facts again.
Klipsch RF-7 III has a balanced frequency response of 32 to 25k Hz, 8-ohm impedance, 100 dB sensitivity, and 1000-watt peak power.
Balanced frequency response is the prerequisite to getting the most pleasing sound stage. Here 32 to 25khz is excellent for a precise sound. The human ear’s audible frequency range starts from 20 Hz to 20 kHz. Within this range, everything is heard clearly. That’s why RF-7 III can produce a good, distortion-free sound.
Other criteria I have already discussed.
For a tower speaker, 1000-watt peak power is perfect for handling the whole sound system. Within this output power, it can work effortlessly and smoothly.
Klipsch RP-8000F
All the speakers belonging to the Reference series are mind-blowing and keep terrific people with superb audio performance. We choose Klipsch RP-8000F as one of our best choice, which is at the same time a tough competitor of RF-7 III.
Not only RF-7 III but RP-8000F is also giving stiff competition to other high-end speakers. This is no less than any soundbars and a perfect pair for your home theater.
For movies or music, this is a perfect solution. You can have parties over your home, and without any extra speakers, you can have a blast.
For rock and jazz music, this speaker can be so loud. And if you want some soft classical music then because of the more transparent sound that music also hears so beautiful.
The mids are excellent, and the highs and lows are balanced. All single lyrics are audible, which you may have missed all of these years. You can catch every dialogue and song and never be wrong spelling lyrics again in your life.
Now coming to movies or TV shows, we actually need the crips and clean sound without any distortion. RP-8000F comes with the ability to provide the desired audio quality.
It has an 8″ woofer for producing bass, which amazed me. Both Klisch RF-7 III and RP-8000F without a subwoofer produce powerful, punchy bass. All the bass lovers would really love to feel the punch of bass that these speakers offer.
Like the Klipsch RF-7 III, RP-8000F doesn’t have 1000-watt peak power, but with 600-watt peak power, it still manages to give a dynamic sound stage. 98 dB is also another point for this speaker as it gets loud enough.
Next, the frequency response is 32 Hz to 25 kHz, making it great to combine with other features.
In a word, this speaker doesn’t contain much lacking regarding the sound quality. So, if you are thinking about having this, that won’t make you regret it ever.
Klipsch RF-7 III VS RP-8000F: Differentiator
Klipsch RF-7 III and RP-8000F have very little difference between them. But something those little things can make a huge difference.
RF-7 III comes with a bigger 10″ woofer with robust and rich bass. Also, it has more output and peak power than RP-8000F. There is a slight difference in sensitivity rate between 100 dB and 98 dB for RF-7 III and RP-8000F.
So, ultimately RF-7 III is slightly better than RP-8000F and thus is the winner in this debate.
3 Best Alternative Klipsch Speakers
It is evident that not all of you would like Klipsch RF-7 III VS RP-8000F. And if that is the case, then we have selected some of the best Klipsch speakers for you.
If you are a Klipsch fan but want to explore something different, then this list is just going to help you.
Explore some different types of speakers according to your taste and budget. Then make your choice to enjoy the powerful sound system just sitting in your home.
Klipsch Reference R-26FA Dolby Atmos Floor-standing Speakers
Klipsch has been known for its dedicated, clever engineered, and incredible performance for years. Day by day, this brand is improving its speaker’s performance by utilizing newer techniques.
With a good quality Klipsch speaker, you would feel that you are having the best time in your life with the most life-like sound quality. This R-26FA is another invention of Klipsch with Dolby Atmos.
Those who know about Dolby Atmos must be pleased after hearing this. This speaker gives a multi-directional sound stage by reflecting its sound from the ceiling.
There is the 1″ Aluminum Diaphragm Compression Tweeter, dual 6.5″ Copper Spun IMG woofer with a magnetical shield, square shape 90×90 Tractrix horn.
This aluminum tweeter with Tractrix horn technology maintains excellent high-frequency quality, thus producing realistic sound. There is the LTS tweeter is also present to minimize the distortion from the sound, so you don’t have any further complaints.
These technologies take the speaker quality to a significant extent.
There is a built-in elevation channel for Dolby Atmos to add more punch to the sound stage. Now you can get the sound like the original content, whether it is music or movie sound.
Listen to your favorite music with great detail in it that you may have been missing for years. Or enjoy your favorite movie night with a thrilling experience.
There is a detachable grill giving protection to the woofers. If you don’t want them, just remove them and see the beauty inside. Besides, the overall structure is beautiful and sophisticated, which can increase your home’s beauty.
Klipsch RP-280F
All the speakers belonging to the Reference Premiere series have impressed the consumers. Obviously, there are enough reasons behind this success.
If you are not into RF-7 III or RP-8000F, then you can count on this RP-280F tower speaker. Though you won’t see many dissimilarities between these three speakers, you may still find it better.
This speaker is equipped with Klipsch traditional Tractrix Horn, which is engineered to a circular horn throat connected to a square shape mouth horn. Klipsch added this technique to most of its speakers for better high-frequency.
It also coupled the horn with compressed molded rubber, decreasing the harshness as much as possible. Reducing this ensures more detail in the sound stage.
Then comes the tweeter with LTS technology with it to minimize the distortion. Some brands consume this Linear Travel Suspension technique for improved sound quality.
To cope with the tweeter, 8″ dual Cerametallic woofer cones. These two woofers can produce some dynamic quality bass without any extra subwoofer. This is good news both for bass lovers and those who don’t want to spend further.
Extremely lightweight, rigid, and outstanding construction makes these woofers dynamic. All in one word that this Klipsch RP-280F is one of the best speakers of Klipsch. It produces some natural, life-like sound stage, making it a perfect home theater pair.
Do you want to use it with your TV or for an only movies or tv shows purpose? Then do that with ease and experience the next level, clearest sound ever at a very reasonable price.
Klipsch Synergy Black Label F-300
There is no denying the fact that Klipsch speakers are incredible in every aspect. There is not a single speaker that didn’t surprise the consumers.
We have added a Synergy Black Label F-300 tower speaker for you. If you are a music or song freak and want your room to fill with sounds around you, then this speaker is for you.
That accurate, realistic, non-fatigued sound stage can drive anyone crazy and can make you listen to this speaker for hours. Enjoy a long hour of movie night and feel that you have gone to another world inside the movie.
If you have a good quality tv or home theater, then you will just feel that you are inside the content. Sound from every direction hitting the walls and reflecting you is awe-inspiring.
Featuring frequency response 35Hz-23KHz, power handling 150W RMS / 600W peak, sensitivity 97.5dB, impedance 8 ohms, 1″ high-frequency drivers, aluminum diaphragm compression driver,90° x 60° square Tractrix® Horn, dual 8″ woofer.
This speaker contains all the Klipsch standard specifications behind Klipsch’s signature sound quality. You can have this single speaker or in pair according to your need.
If you want a speaker for home theater, go for the pair. The 97.5 dB, trust me, is going to give you a wall-shaking loudness.
Now depends on your choice whether you want to go with this speaker.
A Complete Speaker Buying Guide
Before buying any equipment by yourself, you need to know about the critical configuration. This can help from choosing the wrong one for you, and you won’t need expert advice.
This complete speaker buying will help you choose the suitable tower speaker for you.
Speaker type
A speaker can be two types that are active or passive. The active speakers has a integrated amplifier with them, but the passive one doesn’t.
If you choose an active speaker, you don’t need to pay extra money. You can have excellent quality sound as amplifiers amplify the weak signals into a powerful movement.
But if you choose a passive speaker, I would recommend you have an additional amplifier.
Drivers
The second crucial point is the drivers. There are two different types of drivers that work inside the speaker, one for producing high-frequency and another for low frequency.
Tweeters are the type of drivers that produce high-frequency. You will see horn tweeter, dome tweeter, and cone shape tweeter.
Among these three types, horn tweeters are the best for producing detailed high-frequency with the lowest distortion. Note one point that is, if possible, go for an LTS tweeter that is best to reduce the distortion.
Next for low-frequency woofers, the second type of driver. Go for an 8″ or 10″ woofer with suitable materials for dynamic bass.
Frequency response/ impedance/ sensitivity
Frequency response lies between 20 Hz to 20 kHz is the best to produce perfect sound. The human ear’s audible range is 20 Hz- 20 kHz, so the speaker needs to work within this range.
Luckily all the speakers in our list have a balanced frequency range and other features. So, if you are going to choose from here, you don’t need to take extra stress.
Next, 8-ohm impedance with a sensitivity of at least 90 dB is expected for a louder sound.
Final Verdict
Klipsch RF-7 III VS RP-8000F are the two most amazing speakers filled with numerous impressive features. Both of these speakers are great in every aspect, and they have given the most challenging competition to each other.
It is really tough to find the best speaker among these two. So, we see the better speaker also highlighted the comparisons for your better understanding.
Though Klipsch RF-7 III and RP-8000F have almost identical features but admittedly, RF-7 III comes with improved performance. This is the better version of RF-7 and RF-7 II.
But that does not mean RP-8000F is not doing well. There is no need to talk about the quality of Reference Premium series speakers.
Still, we have added the alternative option for you to explore something new. They are all from Klipsch for the Klipsch lovers.
In the end, the decision and choice are only yours. By knowing the needs and budget, go with the perfect speaker for you.
Student of Computer Science and Tech Journalist. Read More
