Suppose you were just listening to some good old music in the middle of the night and suddenly heard a buzzing distant sound in the background. How will you feel? When headphones begin to get messed up, it’s common to lose your mind. You just wanted to relax and listen to your favorite music, but you keep hearing those annoying audio sounds. What are your options for dealing with this issue?
The good news is these buzzing and static noises can be reduced easily and effectively. This detailed article covers possible reasons and ways to eliminate audio statics for various devices.
Let’s find out.
What Causes Static Noise in Headphones?
It’s important for you to know that there are a few possible causes or reasons as to why there is static noise coming from your headphones. Identifying the initial cause of the issue may ultimately change the way that you solve the issue with your solutions, even if you don’t know how do Headphones work.
Incorrect Audio Settings
If you’re certain your headphones are working properly, you could try to check your device’s sound settings and make any necessary changes to see which ones help to solve the problem.
The volume might max out and create popping or cracking noises if the treble or bass settings are set too high.
Aside from that, listening to anything at extremely high volumes might cause static noise if the headphones were not designed to output sound levels at those levels.
Radio Wave Radiation
Every electrical equipment emits some degree of radio wave radiation, which can enter your headphones if the wire isn’t properly insulated. Static noise in headphones is caused by the power supply. Electromagnetic radiation is produced by electronics, and the more electricity that passes through them, the more they emit.
Having issues with the Auxiliary Port
A further problem that could occur is that the audio port of the playback device causes static noise. This happens when the inside section of the auxiliary port becomes oxidized and filthy, lowering the sound quality of your headphones.
Disconnected or Loose Wires
Typical headphones have very thin rubber coatings covering tiny conductive wires. These cables allow electrical impulses to flow to and from the speakers. Because of the material, it’s simple to bend the casing, especially if you loop it. In effect, the cables lose the electronic impulses, which results in cracking noises.
Static Noise from Wireless Headsets
It’s also worth noting that wireless headphones are susceptible to buzzing or static noises. It’s possible that this is due to potential interference from other surrounding items or gadgets.
Broken Headphone Speaker
A broken headphone speaker would be the worst nightmare. This might be caused to faulty wiring or general wear and tear over time. High-volume listening or physical damage can sometimes degrade the quality of speakers.
You may not realize it, but phones, printers, and other electrical equipment can produce interference, resulting in crackling sounds.
Unclean Audio Jack
The audio jack becomes dirty every time you connect and unplug the headphones, which you may not notice. Some dirt will get stuck in the wires from time to time. Unfortunately, such stains make it impossible for the gadgets to function correctly.
An app may occasionally malfunction and emit a weird robotic noise, as though something is terribly wrong with your headphones.
Corrupted Audio Drivers on Your PC
If everything was alright before the recent software update, but the sound became louder and came with a static noise thereafter, the problem must be with the audio drivers.
Bluetooth Headphones with Static Noise
It happens when there are too many Bluetooth devices in one location, and is commonly referred to as Bluetooth noise. The only practical option is to keep your smartphone as near to your headphones as possible and to avoid congested locations.
Bluetooth is a rather reliable connection. Even though it runs at a comparable frequency as Wi-Fi and even microwave, it employs several channels to prevent signal interference.
However, with more and more headphones relying on Bluetooth connectivity, interference is becoming increasingly common. Check out two of the best Bluetooth headphones in the market also.
How to get rid of static noise in headphones
There are some very easy ways to reduce static noise. Here I tried to discuss them.
Headphones Jacks’ Replacement
We are all aware that the personal computer has many jacks (audio). It is advised that you remove the wire from the one you are using to lessen or eliminate static noise. Connect the cable to a different speaker jack. If the static noise has gone away, you may infer that the issue is with the jack, which might be damaged.
This will provide a short-term remedy. You will not be missing out on anything crucial this way. You can, however, take the headset to a nearby electrical retailer for a permanent installation.
Switch to a Different Connector
You might also wish to experiment with various ports for your headphones or speakers. If the sound continues, you can immediately identify whether the issue is with the speakers or the headphones. If, on the other hand, the sound is clear, this indicates that there is an issue with the port.
Another idea is to look at the extension cable or power supply. If the extension is powering ten items, including your speakers, you may choose to unplug some plugs to make a difference.
Clean AUX Connector
You can either send your device to a repair shop or try to do a bit of cleaning yourself:
Grab a toothpick or cotton swap and wrap it with double-sided tape. Gently insert it into a port and circle around. Try to pick up as much as you can. Repeat this a couple of times.
In the end, you can also use a Q-tip and some alcohol to clean the port.
Wires and Its Checking
Wires are readily loosened. That is done unintentionally and without much notice. In this case, you should inspect the headphones’ cables. If you believe it’s loosened up and isn’t tightened, repair it right away. The most common cause of static noise is wire deterioration. As a result, you must keep an eye on that as well.
Speaker Driver Malfunction
Unfortunately, you won’t be able to do anything about a hardware problem unless you use a warranty. You can try to obtain a replacement driver and change it yourself if you’re proficient with a soldering iron.
It’s also worth mentioning that a poor connection might cause one side of the headphones to be entirely muted. Play some music with the volume turned up to eleven. In certain situations, the driver who has been muted resurfaces.
Check Whether The Issue Is with The Headphone
Check to see whether your speakers or headphones are damaged before starting the troubleshooting process. This may be accomplished by connecting your speaker or headphone to another computer that is functional. While you’re doing this, listen to see if the static sound is still present. If the audio static persists, you’ve figured out if the issue is with the speakers or the headphones.
If the problem is with the speakers or the headphones, you could wish to upgrade or replace them. After all, the sound quality of your device affects the overall listening experience. If you detect a strange sound, you may want to consider updating.
Quick Fix on Your Mac
Having problems with static noise is common following a MacOS upgrade. It’s possible that restarting your computer will solve the problem. If this isn’t an option for you, or if you tried it and it didn’t work, you may try the following:
- Connect your Mac’s headphones.
- From the SYSTEM PREFERENCES menu, choose SOUND. This may be found under the category SOUND EFFECTS.
- Ensure that the headphones are selected as the output device.
- Remove the check mark from the box PLAY FEEDBACK WHEN THE VOLUME IS CHANGED. After that, toggle on and off while checking your headphones to see whether the static noise is gone.
Try Reinstalling Drivers
Reinstall the drivers or undo the upgrade can do the trick, if you have a corrupted driver or an update.
- Right-click the speaker icon in the bottom right corner of Windows 10 and select Open mixer volume.
- Select the tiny speaker icon from the drop-down menu. A new tab should pop up.
- Click Properties under “Controller Information.” A new window should appear.
- Click the blue-yellow shielded Change settings button. You will require administrator privileges.
- A button called “Roll Back Driver” may be found in the “Driver” tab. If you are unable to click on it, remove the device (driver) and let the computer to reinstall the drivers for you.
Change the Power Supply
The solution is to replace the power supply with a more optimized and effective one, as well as to eliminate power-hungry components that emit electromagnetic radiation. Look for a shielded audio processor the next time you buy a motherboard.
Incorrect Sample Rate and Bit Depth Values
Static noise in headphones can occur when you put too much strain on your sound card’s DAC. Thankfully, this is a simple remedy.
- (This is for Windows 10) Select “Open mixer volume” from the right-click menu on the speaker icon in the bottom right corner.
- Select the teeny-tiny speaker picture. A new tab should pop up.
- Use alternative bit depth and sampling rate parameters in the “Advanced” tab.
- Check to see whether the issue has been resolved.
Quick Fix on Your iPhone
Even though hearing static sound is not prevalent with iPhones, it is possible to run across this issue. If this occurs, you should take the following steps:
- Hold the power button down for a few seconds to do a soft reset.
- Drag the slider to turn the phone off when you see ‘Slide to Power Off’ on your screen.
- Wait approximately a minute before turning the phone back on.
- Check to see whether the static issue still exists.
It’s also a good idea to shut down any programs that are running in the background.
- After tapping the Home button for a few seconds, open the APP SWITCHER.
- Swipe up on the preview screen to check your applications. You may stop the process by flicking the applications on the screen.
Change the Audio Format
It’s also possible that your headphones aren’t compatible with the audio output format. You may do this by changing the audio format to:
- Hold down the Windows key and the S key at the same time. Click ‘Open’ after typing ‘Control Panel.’
- Select SOUND from the HARDWARE and SOUND menus.
- From the PLAYBACK tab, right-click ‘SPEAKERS’ and choose PROPERTIES.
- Navigate to the ADVANCED TAB. Under DEFAULT FORMAT, change the audio format.
- Click OK after clicking APPLY.
Lastly, hearing is hampered by media recordings. The most modern models of headphones work well with old music recordings. That is why we always advise consumers to use higher-quality headphones. This helps to reduce static noise.
FAQs: How to Get Rid of Static Noise in Headphone
Well, we are almost at the end of the article. At this stage, we’ve compiled some of the most asked questions and their solution. Let’s find out more!
What Is the Best Way to Get Rid of White Noise with Headphone?
To eliminate the echo, put on headphones if your microphone is picking up sounds from your speakers. Use a Headset or a Dedicated Microphone. The built-in microphones on many laptops are of poor quality. Sure, they function, but that’s about all there is to say about them.
Is Static Present in All Bluetooth Headphones?
Most probably. If the system loses connection to the Bluetooth device, it will automatically fall back to the internal audio system.