Although wired connection between speakers and subwoofers is the best and powerful connection, wireless connectivity is also quite popular. Dayton Audio, KEF, REL makes some of the best wireless subwoofer kit. While placement procedure is often neglected, it has major effect on the audio quality.
The best wireless subwoofer kit ensures stable pairing and connection. It also focuses on lossless audio transmission and avoid interference at any cost. In most cases, even after purchasing the best subwoofer, you don’t get the optimum audio.
Most of the brands design the wireless kits specifically for their subwoofer models. However, there are some that will work with any receiver or subwoofer. Other factors like latency, interference and connection ports will help you choose the best one.
Best 7 wireless subwoofer kits:
The following section reviewed the best 7 wireless subwoofer kit. Most of the products are affordable and reliable.
Dayton Audio Wave-Link WLS System
- Operating frequency: 2479MHz
- Frequency response: 22Hz-20kHz
- Operating range: 20 meters
- Audio latency:32ms
The Dayton Audio is one of the best wireless subwoofer kits with built-in DAC. It comes with a receiver and transmitter like most other wireless kits. There are also two 3.5 mm stereo male to stereo male RCA adapter cables, two 3.5 mm stereo male 3.5 mm to mono male RCA adapter cables, and two 3.5 mm to mono male RCA adapter cable.
The transmitter has a toggle switch with which you can select input source like digital or analog. You can connect maximum three receivers to expand your setup. Along with having a DAC, it can be used with powered speakers and amplifiers.
You can do several things with the Dayton audio wireless subwoofer kit. can make your main speakers wireless and use them outdoors. You can also connect it to your PC with the USB port and play audio. If the transmitter and receiver get unpaired, push the pair button on both devices together to complete pairing.
For connection, use the single RCA for subwoofer. Connect between subwoofer out port of the receiver and the input of transmitter. Then connect between the output of the receiver to the Line In or LFE of the subwoofer. As mentioned, before you can connect it to PC with USB and TV.
While placing the transmitter and receiver, make sure to have a clear line-of-sight between them. The Dayton wireless kit for subwoofer has very stable performance which is similar to wired connection.
Klipsch WA-2 Wireless Subwoofer Kit
- Frequency of operation: 2.4GHz ISM band
- Channel: Automatic
- Signal range: 50’ (15m)
- Frequency response: 15-150Hz +0/-3dB
Klipsch WA-2 wireless adapter has two devices: a transmitter and a receiver. By using this, you don’t have to worry about spending on cables or hide them in a room. You also don’t have to buy additional wire in case you need to place the sub far away.
The Klipsch WA-2 kit can work with a 15m of radius with 2.4GHz frequency range. You can use this Klipsch wireless subwoofer adapter with R-115SW, R-112SW, R-110SW, Energy ESW-M6, Mirage MM-6, MM-8 and Jamo subwoofer 800. If needed, 4 WA-2 kits can be added in your setup.
In case you have Wi-Fi or other wireless network in your home, the Klipsch wireless subwoofer kit will not have any interference or interaction with them. The input gain allows the kit to seamlessly work with different receiver or preamp.
Connection is pretty straightforward for the Klipsch wireless subwoofer kit. Check for Subwoofer Pre-Out, Sub Out, SW Out on your receiver and insert one end of the cable to it. Complete the connection by inserting the other end to ‘C’ port of WA-2 transmitter.
Then establish a connection between WA-2 receiver and WA-2 port of the subwoofer. Power the WA-2 transmitter. Turn on devices and place the Gain switch at ‘A’. The subwoofer which gets signal from receiver via the transmitter becomes active.
Once the receiver and transmitter are paired for the first time, next time they will go for automatic pairing. The transmitter has RCA cables and the receiver has 4-pin connector. If you want to use it with other sub, it must have WA port, otherwise it will not work.
In case you have a system where you will run one sub wirelessly and another with wire, you can do so. With the device, there will not be any sound loss. If the sub power is set to auto or off, the receiver will also turn off automatically.
SVS SoundPath Wireless Audio Adapter
- Frequency response: 6Hz-2kHz
- Operating frequency:2.4GHz
- Transmission Range: 60
- Latency: 14ms
The SVS Soundpath wireless audio adapter kit includes a transmitter and receiver. It also has two 3.5mm stereo male to stereo male RCA adapter cables and two 3.5mm to mono male RCA adapter cable. There are several benefits of using the wireless kit.
Along with having fewer and clean cables, the SVS wireless subwoofer kit gives you placement freedom to get the best bass from your subwoofer. In several tests and measurements, the SVS wireless subwoofer kit shows reduced performance when there is mobile phone near it.
However, the manual suggests not to place the SVS wireless transmitter near routers, 2.4GHz wireless phones, or mobile. Use the RCA interconnect to connect the AV receiver to the TV, receiver or other device. Take the receiver to connect it to the SVS subwoofer or other brands.
You can also connect it to powered speaker or amplifier. Pair between the transmitter and receiver. A blue light will indicate pairing is complete. You can pair three adapters to use them for multi-room audio. The SVS wireless kit supports 16 bit/48kHz so connecting it with speakers will give good results.
Make sure there is Line of Sight between transmitter and receiver. Place the receiver within 65 feet of the transmitter. In case you want a wireless subwoofer kit which you want to use for speaker and amp as well, then this is the best subwoofer wireless kit. In case of any confusion, you can use the SVS Soundpath wireless audio adapter manual.
Overall, the build quality is average and the performance might vary from user to user. This is because if you place several objects between the receiver and the transmitter, the performance will degrade. SVS SPWADAPT Soundpath wireless audio adapter ensures quality while decluttering wires.
REL Acoustics Arrow Wireless Transmitter and Receiver for Models T9i, T7i, and T5i
- Wireless output power: 10dBm
- Wireless effective distance: 50 ft.
- XLR .1/LFE: 10k ohms
- Transmitter: 5.125 x 3.5 x 3.25 in.
- Receiver: 2 x 3 x .5 in.
REL Acoustics is known to produce reliable and high-end products. This REL wireless subwoofer kit has transmitter and receiver with gloss piano black finish. It has High-Level Neutrik Speakon, LFE single phono as input connectors.
REL uses zero compression method and LSI technology. In ensures the best performance even while being wireless. There are high level inputs and .1/LFE which can be used for stereo or multi-channel music. Connecting it to receiver means the subwoofer will get similar signal which are fed to the primary speakers.
As a result, the integration between subwoofer and main speaker will be better. This REL Acoustics Arrow Wireless Transmitter is specially manufactured for Serie T/i subwoofers but not for Tzero. Along with a pair switch, the transmitter has LED light which shows whether the devices are paired.
This is similar for the receiver as well. REL recommends using High-level input for most cases. To complete connection, connect the red wire to the right speaker positive terminal and yellow to the left of the amplifier. Insert the Speakon connector to the input of the receiver.
In case you are using Mono Block amplifiers, you should use two REL kits. The user manual is helpful and comes with elaborately explained details. With 15-22 ms latency, this wireless kit subwoofer is better in delivering the pure bass just as the subwoofer is intended to sound.
REL ensures you can place the subwoofer in room corners, glass walls, or hardwood floors. You have the flexibility to connect one subwoofer wirelessly and another with wired. However, make sure you have the recommended REL subwoofer, otherwise it will not work.
- Operating frequency: 2.4GHz
- Channel selection:34
- Frequency response: 20-20000Hz
The OSD transmitter and receiver are compact in size. Along with a receiver and transmitter, the kit comes with RCA cable. Use the RCA cable to connect the transmitter and the sub jack. Similarly, connect the sub and receiver.
Make sure to use adapters that comes with the package. A green LED light on the receiver indicates they are active. The OSD wireless subwoofer kit has standby mode which is enabled if there is no signal for 17 minutes.
In case you hear any interference push the M button on both receiver and transmitter and wait. The kit focuses on producing crystal clear audio. The OSD has another wireless kit, the Nero-WSA. You can use these OSD wireless subwoofer kits with Klipsch sub or other brands.
You can pair multiple OSD receiver and transmitter in large setups. The wireless kit ensures that the connection remains stable at all times without any hum, hiss or pop. This OSD-WK100 is one of the best versatile wireless subwoofer kits that you can use to connect multiple subwoofers.
For this, you need one transmitter and multiple receivers. The SNR is decent and the frequency response ensures the bass can go as low as possible. The Rocketfish Universal Wireless SubWoofer Kit is another widely used subwoofer kit which you can look into.
- Radio frequency: 5.2 and 5.8GHz
- Sampling rate: 24-bit 48kHz
- Link distance: 100ft
- Frequency response: 10-22000Hz
- THD: 90dB
The receiver and transmitter have compact design. The pairing remains stable within 100ft of Line of Sight. The KEF wireless adapter kit focuses on quality and detailed of the sound. the operating frequency of 5.2 and 5.85GHz ensures lossless audio.
In case you want of connect multiple subwoofers, use multiple receivers to do so. The kit has Advanced RF Selection Algorithm. The KEF KW1 is designed for Kube 8b, 10b, 12b, KC62 and KF92 sub models. Along with these, you can use it with KEF LSX, LS50, LS50 II.
Overall, it is one of the best wireless subwoofer kits for everyday use that delivers high-fidelity audio. You need stereo RCA, sold separately to connect the receiver preamp or amp. The receiver needs to be attached with the sub and connects to the expansion port of it for power supply. Transmitter needs USB adapter.
The KEF subwoofer wireless kit can pass high quality 24-bit/48kHz audio signal. In case of any interference, press the ‘pair’ button on the transmitter and the receiver. The LED will show green for 5.2GHz and red for 5.8GHz.
Press and choose the same color for both devices. Then press and hold to establish the channel. Follow the same process if you want to pair another receiver. Along with this wireless subwoofer kit review, several other users confessed how they liked this product.
BIC WTR-sys wireless Transmitter/Receiver
- 4 channels
- RF band: 2.4GHz
The BIC is one of the best budget friendly wireless subwoofer kit. The devices come with antennas that can go through ‘unobstructed’ surrounding up to 80’ and 60’ for indoors or ‘obstructed’ surroundings. Along with subwoofer, it is also compatible with receiver, PC, MAC, mobile and speaker.
So, if you want to make the home theater wireless, you can do so with BIC wireless kit. This makes it the best versatile wireless subwoofer kit. If you want to connect multiple subs, you can buy additional receiver. With 4 channels, you can setup 4 different zones.
For connection, use a 3.5mm preamp out jack for receiver and 3.5mm or RCA connection for others. The kit avoids interference or delay and delivers optimum audio quality. The devices come with Velcro strips so that you can place them in different setups.
The kit supports CD quality sound which means audio quality is not compromised. A blue LED on the device ensures connection is established.
How I rated the best wireless subwoofer kits products:
While most features and characteristics of subwoofer kits remain same, they may vary slightly. The best wireless subwoofer kit buying guide will help you identify the differences and make the right choice.
- Connections are an important factor. Check whether the wireless kit receiver has pre-out or make sure it will work with speakers easily. Connections and ports are important because the main intention to use the kit is to make connectivity feel like breeze.
Wireless kits like Klipsch wireless kit WA-2 will only work with WA ports which limits its connectivity making it less versatile.
- Some kits have USB and built-DAC like Dayton wireless subwoofer kit which can be connected easily to TV, PC. Others don’t have this option. Wireless kits like SVS SPWADAPT and KEF supports 16-bit 48kHz and 24-bit 48kHz high quality audio signal.
- While most models have a frequency band of 2.4GHz, you will still find 5.8GHz models. In this case, the higher the better.
- The lower the latency of the kit, the better it is. The operating distance or range is also importance. Since you want to place the sub wherever you want, the range should be higher.
The benefits of using the best wireless subwoofer kit is to have a minimalist look in your cozy room. This also means you don’t have to spend on speaker cables and connectors, the kit will take care of this. Another advantage of using a wireless subwoofer kit is, you can place your speaker and subwoofers outdoors.
If you want the kit to only work with your subwoofer model, search for a kit from the same brand. If you change brands often, choose a versatile subwoofer kit that is compatible with all subs. Multiple cables create a messy situation where you need place to hide them or allow them to go through walls.
You might trip over the scattered wires as well. The most important reason to use this is flexible subwoofer placement. SVS, OSD, Klipsch have budget friendly and reliable subwoofer kits. REL costs more but ensures optimum performance.
You can take this FAQ section as a parting gift from us. even at the end of the article, still we are trying to help you. So, take this FAQ and best of luck with your purchase!
What can I do to improve the subwoofer performance with wireless kit?
Make sure the devices have direct Line of Sight and if possible, place them close to each other. In case of any interference, if the device has ‘pair’ button, use the manual and perform accordingly to ensure stability.
Should I go for wired or wireless connection for subwoofer?
In several cases, the wireless subwoofer kit gives similar performance over wired connection. So, if placement and avoiding several wires are your goal, you should go for a reliable wireless kit. However, if you think, you can live with wires running throughout the room and don’t want to experiment with subwoofer anywhere, then wired connection is best for you.